GFM High Resolution for the exact dosing and measuring of extremly small quantities
GFM High Resolution for the exact dosing and measuring of extremly small quantities
The special design of the GFM High Resolution series flow meters is tailored for measuring and dosing extremely small quantities. They are ideal as meters in test stands and for applications where great flexibility with optimum measuring performance is in demand. Lubricating as well as non-lubricating, abrasive, aggressive and filled media across a very broad viscosity range can be measured precisely and reliably. Only high-grade steels and alloys that even withstand corrosive liquids are used in the production of GFM High Resolution flow meters. Combined with the use of tungsten carbide bearings, the GFM High Resolution guarantees optimum measurement accuracy and a long service life under even the toughest application conditions. Stainless steel bearings guarantee smooth start-up behavior, even with very small volume flows and low-viscosity media. The combination of various gearwheel dimensions and modules supports a broad range of design sizes, covering an enormous measuring range.
Technical Data
- Measuring Range: 0.002 bis 25 l/min
- Measuring Accuracy: up to ±0.1 %
- Repeatability: ±0.05 % (under the same conditions)
- Linearity: ±0.5 % of actual flow (viscosity ≥ 30 mm²/s)
- Materials:
- Housing: as per DIN 1.4305 (AISI 303), 1.4404 (AISI 316L), Aluminum (EN 7075)
- Gears: as per DIN 1.4122, 1.4501 (AISI F55)
- Bearing/Axis: Tungsten carbide or stainless steel ball bearing
- Seals: FKM, PTFE
- Pressure: up to 250 bar
- Medium Temperature: -40 °F up to +257 °F (-40 °C up to +125 °C)
- Extreme resolution (up to 1,000,000 Imp/l)
- Pickup-Electronic Compact, integrated electronics
