2 Valve Manifolds D Type
2 Valve Manifolds D Type
AS-Schneider Direct Mount 2 Valve SB Manifolds are designed for direct mounting to Pressure Transmitters with standard flange connection in accordance with DIN EN 61518 / IEC 61518 and are compatible with the Shell® MESC Specifications for Process Instrumentation. The SB Manifold can be assembled directly to a Standard Mounting Bracket SAM Type, eliminating the need for extra Mounting Accessories and reducing pipe work on site. Inlet connections are G 1/4, 1/4 NPT or 1/2 NPT female threaded, the vent connection G 1/4 or 1/4 NPT female. The connections can be fitted with or without twin ferrule compression fittings. The Instrument connection is acc. to DIN 19213 part 2, revision 1980 or DIN EN 61518 Type A, alternatively available as Integral Manifold for Rosemount 2051/3051 CoplanarTM Pressure Transmitters. Manifold to Transmitter Mounting Kits are supplied with the manifold as standard.
Part No.: SBA-DA0-SGS3T
| SB | SB Manifold |
| A | Packing: PTFE |
| - | |
| D | Type: Single Isolate / Vent |
| A | Transmitter Connection: DIN 19213 part 2, rev. 1980 |
| 0 | |
| - | |
| S | Material: 1.4401 / 1.4404 / 316 / 316L |
| G | Process / Vent Connection: G 1/4 Female |
| S | Compression Fitting: Swagelok |
| 3 | Size Compression Fitting: 10 mm |
| T | Option: Anti-Tamper Key |
Product variations
| Type | MESC Code 1 | MESC Code 2 | Description | Seal Ring/Packing | Vent | Part Number | Estimate |
|---|---|---|---|---|---|---|---|
| D | MESC 60.98.56.235.1 | MESC 6098562351 | 2 Valve Manifold - For pressure transmitters of the differential body design. | PTFE | 10 mm* | SBA-DA0-SG*3 | |
| D | MESC 60.98.56.435.1 | MESC 6098564351 | 2 Valve Manifold - For pressure transmitters of the differential body design. | Graphite | 10 mm* | SBA-DC0-SG*3 | |
| D | MESC 60.98.56.237.1 | MESC 6098562371 | 2 Valve Manifold - For pressure transmitters of the differential body design. | PTFE | 3/8"* | SBA-DA0-SG*8 | |
| D | MESC 60.98.56.437.1 | MESC 6098564371 | 2 Valve Manifold - For pressure transmitters of the differential body design. | Graphite | 3/8"* | SBA-DC0-SG*8 | |
| * Compression Fitting - Make, type, size and composition as specified in the requisition/indent. |
Any specific questions about this product?
Prefer a more personal approach? Call PhoneNumber or sent a mail to info@marktechnical.nl
