Heatings SAS & SAE Type
Heatings SAS & SAE Type
AS-Schneider SAS Steam Tracing Blocks & SAE Electrical Heaters are used to provide Frost Protection and to maintain Process Temperatures given that the heaters are mounted directly to the Manifold which ensures efficient Heat Transfer to the Manifold and Transmitter Body.
SAS Steam Tracing Blocks
Steam Tracing is provided through a separate Stainless Steel Block which is mounted directly to the Manifold with one Stainless Steel M8 Mounting Bolt. The Connection to the Steam Line is provided by two G 1/4 (optional 1/4 NPT) Female Ports equipped with Tube Fittings.
SAE Electrical Heater
Conduction Heater with self-limiting output characteristic, supplied with cable length of 1m. Is directly mounted to the Manifold with one Stainless Steel M8 Mounting Bolt.
Part No.: SAS-000-SGS4
| SAS | SAS Steam Tracing Block |
| - | |
| 0 | |
| 0 | |
| 0 | |
| - | |
| S | Material: 1.4401 / 1.4404 / 316 / 316L |
| G | Connections: G 1/4 Female |
| S | Compression Fitting: Swagelok |
| 4 | Size Compression Fitting: 12 mm |
Product variations
| MESC Code 1 | MESC Code 2 | Description | Vent | Part Number | Estimate | |
|---|---|---|---|---|---|---|
| MESC 60.98.70.010.1 | MESC 6098700101 | Steam Tracing Block | 10 mm* | SAS-000-SG*3 | ||
| MESC 60.98.70.110.1 | MESC 6098701101 | Steam Tracing Block | 3/8"* | SAS-000-SG*8 | ||
| MESC 60.98.70.050.1 | MESC 6098700501 | Electrical Heater | SAE | |||
| * Compression Fitting - Make, type, size and composition as specified in the requisition/indent. |
Any specific questions about this product?
Prefer a more personal approach? Call PhoneNumber or sent a mail to info@marktechnical.nl
