3 Valve Manifolds H3A/H3S Type
S-Schneider Soft Seated Direct Mount Manifolds H3A/H3S Type are designed for direct mounting to Differential Pressure Transmitters. The inlet connection (process connection), as standard, is flanged style. The standard 3 Valve Manifolds H3A/H3S Type have no vent connections. Accessory kits incl. washers are required for manifold to transmitter mounting, because the manifolds are provided with slotted bolt holes.
- Isolate Valves - 1/4" (6.35 mm) or 3/8" (9.5 mm)
- Equalize and Vent Valves - 0.138" (3.5 mm)
The process to instrument connection is fully roddable due to the Cone Design Valve Seat of the Isolate Valves.
Part No.: H3A-SAA
|H||T-Style Manifold - Flange x Flange|
|3||Quantity Bonnets: 3|
|A||Manifold Design - Bore Size Isolate Valves: 1/4" (6.35 mm)|
|S||Material: 1.4401 / 1.4404 / 316 / 316L|
|A||Stem Seal / Packing: PTFE|
|A||Seat Material: ETFE x POM|
Any specific questions about this product?
Prefer a more personal approach? Call PhoneNumber or sent a mail to firstname.lastname@example.org